Troubleshooting
Troubleshooting
Code | Action |
Check the drain hose.
•Make sure the end of the drain hose is placed on the floor.
•Make sure the drain hose is not clogged.
•If the information code remains, contact a customer service
LC, LC1 | centre. |
| |
| NOTE |
| When the washer displays the “LC,LC1” code, the washer do |
| draining for 3 minutes. During this time, the Power button is |
| inoperative. |
| Spinning does not work. | ||
| • Make sure laundry is spread out evenly. | ||
| • Make sure the washing machine is on a flat, stable surface. | ||
Ub | • | Redistribute the load. If only one item of clothing needs | |
|
| washing, such as a bathrobe or pair of jeans, the final spin | |
|
| result might be unsatisfactory, and an “Ub” check message will | |
|
| be shown in the display. | |
|
| ||
| Check the motor for operation. | ||
3C | • Try restarting the cycle. | ||
• | If the information code remains, contact a customer service | ||
| |||
|
| centre. | |
The electronic control needs to be checked (Over Voltage Error).
•Check the PCB and wire harness.
•Check if power is supplied properly.
•If the information code remains, contact a customer service
UCcentre.
Low voltage detected
•Check if the power cord is plugged in.
•If the information code remains, contact a customer service centre.
High temperature heating check
HC • If the information code remains, contact a customer service centre.
44 English
|
| 2017/2/22 11:10:15 | |
|
| ||
|
|
|
|