Top panel
18 LS9-16/32 Owner’s Manual
cSTEREO MASTER section • • • • • • • • • • •
In this section you can operate the main parameters of the
STEREO channel.
1[SEL] key
This key selects the STEREO channel as the target of
operations. The L-channel and R-channel will be alter-
nately selected as the target of operations each time you
press the [SEL] key.
B[CUE] key
This key cue-monitors the STEREO channel. When cue is
on, the LED will be lit.
C[ON] key
This switches the STEREO channel on/off. When on, the
key LED will light. In SENDS ON FADER mode, you can
use this as an on/off switch for MIX/MATRIX channels or
as an on/off switch for the signal sent from the STEREO
channel to the MATRIX buses, depending on the LAYER.
DFader
This adjusts the output level of the STEREO channel. In
SENDS ON FADER mode, this adjusts the level of the
MIX/MATRIX channels or the send level from the STE-
REO channel to the MATRIX buses, depending on the
LAYER.
vUSER DEFINED KEYS section• • • • • • • • •
Here you can execute the functions that are programmed
for the user-defined keys.
1User-defined keys [1]–[12]
These keys execute the functions that have been pro-
grammed for each key (e.g., switching scenes, turning
talkback or the internal oscillator on/off).
1
2
3
4
• If you turn on MONITOR ON MASTER FADER in the USER
DEFINED KEY SETUP screen, the [ON] key and fader will respec-
tively turn MONITOR on/off and control its level.
HINT
1