American DJ Verti-Pro II manuals

8 pages937.24 Kb

American DJ
- 4295 Charter Street
- Caution!
- Customer Support:
- Unpacking:
- American DJ
  - Los Angeles, CA. 90058 www.americandj.com
- User Instructions
  - Introduction:
  - Warning! The 1/4 phone plug on the unit is for the optional VertiPro/C.
  - Warning!
  - 2Introduction..........................................................................2
  - Warranty.....................................................................15
  - DMX Traits............................................................................14
  - Trouble Shooting............................................................12
  - Cleaning............................................................................12
  - Lamp Replacement..............................................................11
  - Controls & Functions..........................................................10
  - Set-Up................................................................................7
  - DMX Addressing.............................................................6
  - Operation..............................................................................5
  - Safety Precautions...................................................................4
  - Features................................................................................3
  - 3Operating Modes:
  - Stand Alone Mode:
  - Universal DMX Control:
  - Master-Slave Operation (Sound Active):
  - Master/Slave Linking:
  - 4Typical DMX Linking:
  - DMX-512:
  - tion): The VERTI PRO II can be controlled via DMX-512 protocol.
  - DMX CHANNEL
  - Data Cable Requirements (For DMX and Master/Slave Opera-
  - 12828 32 256651641 SP
  - Power Supply:
  - Notice:
  - 5Special Note: Line Termination.
  - 5-Pin XLR DMX Connectors.
    - 6Caution:
    - Fuse Repla cement:
    - Fixture Cleaning:
    - Halogen Lamp Warning:
    - Warning:
    - Lamp Replacement:
      - VERTI PRO II Master/Slave Chart
      - VERTI PRO IIs as stand alone units, be sure all the fixtures match the
        ON
      - 511. Follow the instructions below to configure fixture dip switches with
      - This chart list the DMX dip switch setting for DMX address 1 through
        switch 10 is reserved for special functions.
        match the position settings of the chart. For fixtures with 10 dip switches; dip
        switches 6-9 from the chart on the top. Adjust the dip switches on your fixture to
        Identify the position for dip switches 1-5 from the chart on the left and dip
        for off and "O" for on). Find your desired DMX address from the center chart.
        and "O"'s along the top and side of the chart represent dip switch poistion ("X"
        The center numbers of this chart (1-511) represent a DMX address. The "X"'s
        Dip Switch Position
        Head 2
        Head 4
        ON ON
        CW Fast CCW FastCW Slow CCW Slow
        Stop
        255
      - When using this fixture as a stand alone unit or when using multiple
      - This chart list the DMX dip switch setting for single head operation.
      - VERTI PRO II Single Unit Operation Chart
      - The VERTI PRO II is a single DMX channel fixture
      - be using two or more fixtures in a Master/Slave configuration. The
      - configuration for four units. Use these dip switch setting when you will
      - This chart details the Master/Slave dip switch setting for Master/Slave
        01 128
        129127
      - Master - Head 1 settings should only be used once.
        ON ON
        Head 3
        Master - Head 1
        DIP SWITCHES
        DMX Address
      - 7DMX Address Quick Reference Chart
        your desired DMX address. VERTI PRO II DMX Dip Switch Chart
        Master - Head 1
  - 8MODEL: VERTI PRO II
    - 1-YEAR LIMITED WARRANTY
    - VERTI PRO II Warranty
    - written notice.
    - this unit and this manual are subject to change without any prior
    - Please Note: Speci cations and improvements in the design of
      - COLORS: MULTIPLE
      - GOBOS: NONE
      - DUTY CYCLE: 30 MIN. ON, 10 MIN. OFF
      - COOLING: FAN COOLED
      - WORKING POSITION: ANY SAFE POSITION
      - 220V = 5 AMP GMA
      - FUSE: 120V = 10 AMP GMA
      - WEIGHT: 10 LBS / 7.5 KGS.
      - (with yoke extended)
      - DIMENSIONS: 10.5 (H) X 11 (W) X 10.5 (D)
      - ZB-64516 220v/300w
      - LAMP: ZB-64514 120v/300w or
      - VOLTAGE: 120V~60Hz / 220V~50Hz
    - SPECIFICATIONS:
    - American DJ Supply
    - Web: www.americandj.com E-mail: info@americandj.com
    - American DJ World Headquarters:
    - 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610