American DJ Verti-Pro II warranty Verti PRO

VERTI PRO II™	Contents
Introduction	2
Features	3
Safety Precautions	4
Operation	5
DMX Addressing	6
Set-Up	7
Controls & Functions	10
Lamp Replacement	11
Cleaning	12
Trouble Shooting	12
DMX Traits	14
Warranty	15
VERTI PRO II™	General Instructions

To optimize the performance of this product, please read these operat- ing instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

VERTI PRO II™ Features

•Linkable.

•Audio Sensitivity Knob.

•Sound-Active.

•DMX-512 Protocol Compatible.

•Full Focusing.

•Master/Slave Built-In Programs.

•Optional VertiPro/C Blackout Controller.

VERTI PRO II™ Warranty Registration

The VERTI PRO II™ carries a one year (365 days) limited warranty. We recommend you fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact American DJ® customer support for a R.A. number.

©American DJ® www.americandj.com VERTI PRO II™ Instruction Manual Page 3

VERTI PRO II™ Safety Precautions

•This unit may blow a fuse if the maximum allotted load of 10 amps (220v = 5 amps) is reached. If the fuse needs replacement, always replace the fuse with same exact type that was remove. Use of a different type fuse from that which is recommended may cause fire or electric shock and will void the manufactures warranty

•To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

•Do not spill water or other liquids into or on to your unit

•Be sure that the local power outlet match that of the required voltage for your unit

•Do not attempt to operate this unit if the power cord has been frayed or broken

•Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short

•Disconnect from main power before making any type of connection

•Do not remove the cover under any conditions. There are no user serviceable parts inside

•Never operate this unit when it’s cover is removed

•Never plug this unit in to a dimmer pack

•Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall

•Do not attempt to operate this unit, if it becomes damaged

•This unit is intended for indoor use only, use of this product outdoors voids all warranties

•During long periods of non-use, disconnect the unit’s main power

•Always mount this unit in safe and stable matter

•Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.

•Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 7 for cleaning details

•Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

•The fixture should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged.

B.Objects have fallen, or liquid has been spilled into the unit.

C.The unit has been exposed to rain or water.

©American DJ® www.americandj.com VERTI PRO II™ Instruction Manual Page 4