Leviton ACS15-1L manuals

Computer Equipment > Switch

When we buy new device such as Leviton ACS15-1L we often through away most of the documentation but the warranty. Very often issues with Leviton ACS15-1L begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Switch Leviton ACS15-1L is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Switch on our side using links below.

Leviton ACS15-1L Installation Instructions

2 pages199.76 Kb

Single Pole (One location) or 3-Way (Multi-location) Electronic Switch
B
C
- Step 4
  - solid copper wire only.
- Step 1
- *
- INSTALLATION INSTRUCTIONS
  - Tools needed to install your Switch:
  - INSTALLING YOUR SWITCH
    - WARNING:
    - Identifying your wiring application (most common):
    - WARNINGS AND CAUTIONS:
    - WARNINGS AND CAUTIONS:
    - Preparing and connecting wires:
  - Step 3
    - 3-Way
      - (See important* instruction)
    - Single-Pole
- Installing your Alignment Plate: Important Notice for Installer
- Step 2
  - WIRING SWITCH:
  - Switch
  - Installing your Switch Single-Pole Wiring Application:
- Step 4 contdStep 5a
  - Alignment Plate Held By Mounting Screw
  - Alignment Plate Held By Wires
  - Alignment Plate Held By Tape
A
- 2Step 7
  - Proceed to Step 6.
    - Switch
      - Switch
  - www.leviton.com/acenti
  - 1-888-4-ACENTI
    - NOTE:
    - TROUBLESHOOTING
      - Lights Flickering
      - Light does not turn ON and Locator LED does not turn ON
        - Circuit breaker or fuse has tripped. - Lamp is burned out. - Lamp Neutral connection is not wired.
      - Remote does not operate lights
        - Ensure that total wire length does not exceed 300 ft.
    - For additional information, contact the Acenti Information Hotline at
    - or visit Leviton's website at
  - OPERATION
    - WIRING SWITCH (wall box with Load connection):
    - 3-Way Wiring with Matching Remote (w/LED) Application:
- Step 5c
  - WIRING MATCHING REMOTE (wall box with Line Hot connection):
  - WIRING SWITCH:
  - 3-Way Wiring with Coordinating Remote (no LED) Application:
- Step 5b
  - WIRING COORDINATING REMOTE:
  - Testing your Switch prior to completely mounting in wall box:
- Step 6

Also you can find more Leviton manuals or manuals for other Computer Equipment.