Russell Hobbs RH1250(TB)(TW)(RTG)(RTS) manuals

Russell Hobbs RH1250(TB)(TW)(RTG)(RTS) Instruction Manual

39 pages2.35 Mb

2Contents
- Connections to mains supply
3Safety Instructions
- appropriately.
- cause your warranty to be invalid.
- factors (pesticides, fire, etc.).
4Safety Instructions
- turn off the water inlet and leave the door slightly open. This is so that the inside of your
6Before using the appliance
- 7as they will need to be re-used if the machine has to be transported.
- 8 Check location where the washer will be installed. Make sure you have everything
- Never put cardboard, wood or other materials under your machine to try and stabilise
- 9
- To prevent leakages on the connection joints, 1 seal is included in the hose packing, (Fit
- 10Installation
- 9
  - 12
  - Separate heavily soiled items from lightly soiled ones, even if they would normally be
  - 13loading capacity indicated in the programme table for washing programmes. The
  - Pillow case 0.2
  - 14
  - Do not exceed the maximum fill line.
  - 17programme*
  - Before starting the programme, you can select an additional function if you so wish.
  - 20speed of the programme you have selected will be
  - To minimise creasing, use the additional rinse function.
  - is activated when the symbol flashes on electronic
  - 21to the main wash by using this additional function.
  - 23Start/Pause button and the time delay will start to count down.
- 2423
  - When you start your machine, the following symbols for the programmes you have
- - 25When you see the symbol appears on the electronic display, you can either add or
  - press on Start/Pause button.
  - 26To deactivate the Child Lock, both the rapid wash and easy iron functions should be
  - Your machine will stop the washing operation and the programme will be cancelled.
  - buttons are pressed.
  - 27Water cut off / Low Mains Pressure
  - Valve inlet filter may be clogged. Clean the valve inlet filters. (*)
  - 28
  - nearest authorised service.
  - Trouble code
  - open.
  - Possible fault What to do
  - 29Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as and
  - Do not put sharp or metal object in your washer, or they can damage the finish. Check
  - Reconnect power supply cord.
  - 30 Filters are used to avoid dirt and foreign substances in the water from entering the
  - Having the filters cleaned, you can fit them in the same way reversely.
  - 31
  - filter hole to soak up remaining water.
33Removing stains
- of fabric it is, and whether the fabric is colourfast(Check the care label).
34Trouble shooting
- recommended and settle the laundry in the machine
- discharge water.
- Your machine is overloaded with
- Water tap is turned off. Turn your faucet on.
35Trouble shooting
36Specification
37Connection to the mains supply
- If this plug is unsuitable or needs to be replaced, please note the following:
- For UK use only Plug fitting details (where applicable):
38Spare parts
- Spare parts Contact details
- or
- call 0845 208 8750
- PCB Available at www.productcareuk.com
- 39Revision 1
  - Opening times: Monday - Friday