Russell Hobbs RH1250(TB)(TW)(RTG)(RTS) Water cut off / Low Mains Pressure, Blocked pump filter

Washing procedure & program selection

•Leave the door of your machine open to allow the inner part of your machine to dry after removing your laundry.

•Switch the programme dial to Stop.

•Unplug your machine.

•Turn the water faucet off.

Warning Symbols

Water cut off / Low Mains Pressure

If the symbol flashes on the electronic display:

•The water supply may be closed.

•Mains water may be cut-off. If so, switch the programme dial to the Stop position. You can select a programme and run your machine after the mains water is flowing again.

•Mains water pressure may be low.

•Water inlet hose may be twisted.

•Water inlet hose may be clogged. Clean water inlet hose filters. (*)

•Valve inlet filter may be clogged. Clean the valve inlet filters. (*)

(*) See the chapter regarding maintenance and cleaning of your machine.

Blocked pump filter

If the symbol flashes on the electronic display:

•The pump filter may be clogged.

•The discharging hose may be clogged or twisted.

26