Liebert Power Supply important safety instructions

Contents

Main IMPORTANT SAFETY INSTRUCTIONS PowerSure Interactive USER MANUAL 700-2200 VA 230 V Page INPUT OUTPUT TVSS and EMI/RFI Filters MINI-TOWER INSTALLATION 1. Unpack the UPS carefully noting the packing method. Retain the box and 2. Visually inspect the UPS for freight damage. Report damage to the carrier and 3. Locate the UPS where it cannot be accidentally disconnected. Locate it in an 4. Shutdown load equipment, turn off mains supply, and unplug load equipment's 9. Connect the supplied IEC320-10 output cable (B) between the load equipment 10. Turn on the UPS by pressing the On button for at least one half second; then turn 1. Unpack the UPS carefully noting the packing method. Retain box and packing 2. Visually inspect the UPS for freight damage. Report any damage to the carrier 3. Locate the UPS indoors where it cannot be accidentally disconnected. Locate it 13. Connect the supplied IEC 320-10 output cable (B) between the load equipment 14. Turn on the UPS, by pressing the On/Off button, then turn on the connected load 2200 Model 700 Model 1000/1400 Model Page Collector to Emitter* Pin Assignment Page Page Load/ Battery Level Indicators Utility High/Low Utility Alarm silence/Test On/Off D indicator Fault indicator B indicator A indicator BATTERY DISCHARGE CURVES (Discharge times are at 25 C ambient) NOTE: For 1000, 1400, and 2200 VA units press the reset circuit protector button. 700 VA 1000 VA Page Technical Support 700-2200 VA 230 V PowerSure Interactive LIMITED WARRANTY