2Wire 8113P487-60 Control Panel, Using the Touchpads, Clock

8
Control Panel
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes Convect and other model specific features. (Styling may vary depending on model.)
Using the Touchpads
• Press the desired pad.
• Press the number pads to enter time or temperature.
• Press the Autoset 0 pad to enter temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the number pads or
the Autoset 0 pad, the time or temperature will automati-
cally be entered. If more than 30 seconds elapse between
touching a function pad and the number pads or the
Autoset 0 pad, the function will be canceled and the
display will return to the previous display.
Oven Cooking
cont.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to
24-hour format:
1. Press and hold the Cancel and Favorite
pads for three seconds.
• 12 Hr flashes in the display.
2. Press the Autoset 0 pad to select 24 Hr;
press again to select 12 Hr.
3. Set the time of day following the directions
in the To set the Clock section.
To set the Clock:
1. Press the Clock pad.
• The time of day flashes in the display.
2. Press the appropriate number pads to set the time of day.
• Colon flashes in the display.
3. Press the Clock pad again or wait four seconds.
• The colon will remain on.
When electrical power is supplied or after a power
interruption, the last clock time before power was
interrupted will flash.
A B C D E F G H
I J K L M N
AConvect Use for convection baking and roasting.
BBake Use for baking and roasting.
CBroil Use for broiling and top browning.
DCancel Cancels all operations except Timer
and Clock.
EClock Use to set time of day clock.
FOven Light Use to turn the oven light on or off.
GFavorite Use to set and save a specific Cook &
Hold procedure.
HClean Use to set self-clean cycle.
ICook & Hold Bakes for a preset time, then holds food
warm for 1 hour.
JKeep Warm Use to keep cooked food warm in oven.
KDelay Programs the oven to start baking at
a later time.
LNumber Pads Use to set time and temperature.
MAutoset Use to quickly set temperatures.
NTimer Sets Timer.