![](/images/new-backgrounds/1093064/9306415x1.webp)
#ThermalVision™ PRO SW
4. Interpolation. To change the interpolation click on the arrow button.
x 1 (320X240) | x 2 (640 x 480) |
5.Zoom factor. To change the zoom setting click on the arrow button. The following four settings are available X1, X2, X3, X4
(examples of X1, X2 and X4 shown below).
x1 Zoom | X3 Zoom | X4 Zoom |
When zoomed to x2 or more, the part of the image diplayed can be selected by means of the mouse in the Pan Control box.
6.Area Select. Use the arrow button to select a small, medium, or large area for measurement (see page 14).
7.Image alignment. This allows the vertical and horizontal alignment of the thermal and visible images. Clicking on the navigation arrows will move the visible image while the infrared image remains stationary. It is easiest to adjust with a 50% thermal and 50% visible image.
Note: Clicking on the reset button returns the alignment to the setting when the file was opened.
Page 8 of 21 |