2Wire third-party wireless Ethernet adapters - page 11

7
6. Select the System Parameters tab. In the Client Name field, enter a client name. The client name
identifies your PC.
7. In the SSID1 field, enter the word “2WIRE” followed by the last three digits of your HomePortal serial
number. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is
important that you enter the word “2WIRE” in capital letters.
8. In the Power Save Mode field, verify that the CAM (Constantly Awake Mode) radio button is selected
(this is the default).
9. In the Network Type field, verify that the Infrastructure radio button is selected (this is the default).
10. Select the Network Security tab. In the WEP field, select the Use Static WEP Keys radio button.
11. In the WEP Key Entry Method field, verify that the Hexadecimal (0-9, A-F) radio button is selected.
12. In the WEP Key 1 field, select the Transmit Key radio button and enter your ten-digit Wireless
Encryption Key, located on the bottom of your HomePortal.