2Wire third-party wireless Ethernet adapters manual - page 7

3
4. To create your profile, click Add. The Edit Configuration screen appears. Enter a profile name in the
Profile Name field. The profile name identifies your wireless profile, and should be no more than 29
characters in length.
5. From the Network Type pulldown menu, select Access Point.
6. To identify your network, click Next. The Edit Configuration screen appears.
7. In the Network Name field, enter the word “2WIRE” followed by the last three digits of your
HomePortal serial number, located on the bottom of your HomePortal. This is the Wireless Network
Name. The Wireless Network Name is case-sensitive, so it is important that you enter the word
“2WIRE” in capital letters.