Configuring VLANs 49
Figure 32 Tagged VLAN Configuration
To set up the configuration shown in Figure 32,
do the following:
1Create VLAN2 on both Switch 1 and Switch 2.
You need not create VLAN1 since it exists by
default.
2On Switch 1, set the ports that you want to be
part of VLAN2 to Untagged. Set one port (for
example, port 16) to Tagg ed.
Click Apply.
3On Switch 2, set the ports that you want to be
part of VLAN2 to Untagged. Set one port (for
example, port 8) to Tagg ed.
Click Apply.
4Connect the Tagg ed port on Switch 1 (in this
example, port 16) to the Tagg ed port on Switch
2 (in this example, port 8).
Those ports on Switch 1 that are members of
VLAN2 can now communicate with those ports
on Switch 2 that are members of VLAN2.
Spanning Tree
Spanning tree is a bridge-based system for
providing fault tolerance on networks and can
be used to detect and disable network loops.
The spanning tree ensures that the optimal