
34 CHAPTER 4: CONFIGURING THE SWITCH
Modifying VLANsUse the Modify VLAN screen to change the VLAN to
which a port belongs, and configure the port to com-
municate with all other VLANs, or a selected VLAN.
Figure 16 Modify VLANs Screen
■Port – Displays the port number
■Mode – The mode option determines if the port
can communicate with all VLANs, or only with a
selected VLAN
■Uplink – If you select this, the port is able to com-
municate with all VLANs on the Switch
■Desktop - If you select this, the port can only com-
municate with other ports assigned to the VLAN
selected in the VLAN ID drop-down list.
An uplink port is sometimes referred to as a tagged
port. The two terms refer to the same feature.
■VLAN ID – Enter the ID of the configured VLAN to
which you want this port to belong
Defining VLAN MembershipUse the Membership screen to configure port mem-
bers for the selected VLAN.
Figure 17 Membership Screen
■VLAN ID – ID of the configured VLAN (1-4094, no
leading zeroes)
■Name – Name of the VLAN (1 to 32 characters)
■Ports – Port identifier
Sample VLAN ConfigurationsTo illustrate how you can segment network devices
that are connected to the Switch, the following
sample configurations are provided.