CREATING YOUR NETWORK
Dual Speed Hub 16—Front
Alert LED | Power LED | Collision LEDs |
orange | green | yellow |
Off when the Hub is operating | Indicates that | Flash each time a |
correctly. Lit for a short period of | the power | collision is detected on |
time after power on, for self test. | supply to the | the Hub's 100Mbps or |
If the LED is continuously lit, there | Hub is | 10Mbps segment. |
may be a problem. Refer to the | present. | Collisions are a normal |
“Problem Solving” section. |
| part of network |
|
| operation. |
|
|
|
| Port Status |
|
|
| |
100M | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Collision | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
Alert
Power 10M
Green = 100M Yellow = 10M Flash = Partitioned
Port Status LEDs
green (100Mbps link) / yellow (10Mbps link)
If the LED is on, the link between the port and the next piece of network equipment is OK. If the LED is off, nothing is connected, or the connected device is switched off, or there is a problem with the connection (refer to the “Problem Solving” section). If flashing, the port is partitioned, possibly due to a network loop.
Network Utilization
100M
1% 2% 3% 6% 12% 25% 50% 80%
10M
OfficeConnect Dual Speed Hub 16
Network Utilization LEDs
green / yellow / orange (top row:100Mbps; bottom row:10Mbps) Indicate how much the 100Mbps and 10Mbps segments of your network are being used.
6
