36 CHAPTER 4: MAINTAINING SOFTWARE
200 Type set to I.
[ftp]get 88003.app
200 PORT command successful.
150 Binary data connection for 88003.app (192.168.25.210,1117)
(6725435 bytes).
226 Binary Transfer complete.
FTP: 6725435 byte(s) received in 96.753 second(s) 25.00K
byte(s)/sec.
[ftp] quit
221 Goodbye.
<SW8800>boot boot-loader 88003.app
The specified file will be booted next time!
<SW8800>reboot
This command will reboot the system. Continue? [Y/N] y
For more detailed descriptions of the setup and procedures for upgrading
software, see the remaining sections in this chapter.
Upgrading Software
Using The BOOT Menu
To perform this operation, you must have a network connection between the
Ethernet port on the Switch 8800 Fabric module and the FTP/TFTP server. In
addition, you should verify that the file you want to use for the upgrade procedure
is on the FTP/TFTP server in the appropriate directory.
There are several procedures you must perform to complete this operation. They
are described in the following sections:
1Boot the System
2Modify the Ethernet Interface Boot Parameters
3Download an Application to Flash Memory
4Boot from Flash
Boot the System
After powering on the Switch 8800, the BootROM program runs automatically.
The terminal displays the following information:
Starting......
*************************************************
* *
* Switch 8800 Bootrom, Version 113 *
* *
*************************************************
Copyright(C) 2000-2004 by 3COM Corporation, Inc.
Creation date: Jul 5 2004, 10:43:58
CPU type : MPC755
CPU L2 Cache : 1024KB
CPU Clock Speed : 400MHz
BUS Clock Speed : 100MHz
Memory Size : 512MB