Operation Power up the chassis or hub. The FDDI MIC Media Module will operate
correctly once power is applied.
Optical Safety Under most normal viewing conditions there is no eye hazard from the Tx
launcher LED. It is recommended however, that the LED is not viewed
through any magnifying device, whilst powered on.

Media Module

Fails to Operate

If the FDDI MIC Media Module powers up but no communication is
possible, check that:
The remote unit is powered on.
The fiber cable is continuous.
The connectors are clean.
If keys not fitted, the orientation of the MIC connectors is correct.
If these checks fail to cure the problem, refer to the supplier of your 3Com
FDDI MIC Media Module for further advice.
Standards The 3Com FDDI MIC Media Module has been designed to comply with the
following standards:
Functional: ANSI X3T9.5
Safety: UL 1950, EN 60950, CSA 22.2 #950, ECMA 97
R.F.I. FCC part 15 (Class A), Vfg 243 `B', EN55022 A, EC
801 parts 2, 3, 4 & 5
Environmental: IEC 68