3Com 4510G manual Ports, Console Port, 10/100/1000Base-T Ethernet Port, Specification

Rear Panel

Figure 1-4Rear panel of the Switch 4510G 48-Port Ethernet switch

(1)	AC power input	(2) RPS power input (shipped with a protective cover)
(3)	Grounding screw	(4) Interface module slot 1 (MOD1)
(5)	Interface module slot 2 (MOD2)

The Switch 4510G 48-Port provides two interface module slots on its rear panel. Each slot is installed with a filler panel when the switch is shipped. You can select one or two interface modules for your switch as needed. See Optional Interface Modules on page 1-9 for the interface module models supported by the Switch 4510G, and see Installing an Interface Module on page 3-9 for the installation of interface modules.

Ports

Console Port

Each Switch 4510G provides one console port on the front panel. Table 1-2 describes the console port specifications.

Table 1-2Console port specifications

Item	Specification
Connector type	RJ-45
Compliant standard	EIA/TIA-232
Transmission baud rate	9600 bps to 115200 bps (defaulting to 19200 bps)
Service	z It can be connected to an ASCII terminal.
	z It can be connected to a serial port of a local or remote (through a
	pair of modems) PC running terminal emulation program.

10/100/1000Base-T Ethernet Port

Each Switch 4510G provides 10/100/1000Base-T Ethernet ports on its front panel. Table 1-3 describes the specifications of the 10/100/1000Base-T Ethernet ports.

1-4