WebView Issues

Unless otherwise noted, the workaround for Web- View issues is to use the CLI or 3WXM.

WebView does not display more than 32 service profiles. (18374)

WebView allows configuration of duplicate SSID names in the same service profile. (18375)

In WebView, self-signed certificate for network user is not accepted with only a Common Name value. (15651)

If you use WebView to configure a self-signed certificate for network users, the switch does not generate the certificate if you enter information only in the Common Name field and not in other fields.

This issue does not affect the CLI. In the CLI, you can generate a self-signed certificate with only the common name specified. Use the CLI to generate the certificate or use the additional fields in WebView.

If you are running Linux Redhat 9 and use Firefox 2.0 to open WebView, the browser may become unresponsive. (40676)

This behavior is noted on the WX2200 and WX4400.

AAA and RADIUS IssuesDefault 802.1X retransmit interval is too short for manual login. (18032)

The default 802.1X retransmit interval is 5 seconds. Although this interval is adequate for clients that are

Known Problems

23

configured to automatically use the user’s Windows login information as the network login information, the interval is too short for users who must manually enter their network login information.

If the network has clients that do not automatically use the Windows username and password as the network username and password, use the set dot1x tx-periodcommand to increase the retransmit time.

CAUTION: Changes to 802.1X parameters affect all SSIDs managed by the WX switch.

Deleting a user group or MAC user group does not delete membership from its members. (14833)

If you type the clear usergroup or clear mac-user- group command to delete a user group or MAC user group, the display aaa command shows that the user group is gone. However, the user profiles for the users still list them as members of the deleted groups.

Use the clear user group and clear mac-user group commands in addition to the clear usergroup and clear mac-usergroup commands to explicitly remove individual users or MAC users from a group.

CLI allows set authentication dot1x command with invalid combination of pass-through and local options. (15562)

The CLI allows you to enter a command such as the following:

set authentication dot1x ssid any * pass-through local