switch was restarted. For example, if the switch booted from boot partition 1, copy the new image into boot partition 0. To see boot partition informa- tion, type the display boot command.

WX1200# save config

success: configuration saved.

WX1200# backup system tftp://10.1.1.107/sysa_bak success: sent 28263 bytes in 0.324 seconds

[ 87231 bytes/sec]

WX1200# copy tftp://10.1.1.107/wb042302.rel boot1:wb042302.rel

success: received 10266629 bytes in 92.427 seconds [ 111078 bytes/sec]

WX1200# set boot partition boot1 success: Boot partition set to boot1:wb042302.rel (4.2.3.2.0).

WX1200# display boot

Configured boot version:

4.2.3.2.0

Configured boot image: boot1:wb042302.rel

Configured boot configuration: file:configuration

Backup

boot configuration:

file:backup.cfg

Booted

version:

4.1.5.1

Booted image: boot1:wx040105.020

Booted configuration: file:configuration

Product model:

WX1200

WX1200# reset system force

...... rebooting ......

Upgrading MSS

29

Command Changes During Upgrade

The following table lists the commands that are deprecated in MSS Version 4.2, and their replacements.

4.1 Command

4.2 Command

 

 

set radio-profile wmm

set radio-profile qos-mode

 

 

set radio-profile long-retry

set service-profile long-retry

 

 

set radio-profile short-retry

set service-profile short-retry

 

 

During upgrade, MSS makes the following changes to commands in 4.1 configuration files:

■set radio-profile name wmm enable is changed to set radio-profile name qos-mode wmm

■set radio-profile name wmm disable is changed to set radio-profile name qos-mode svp

■set radio-profile name long-retry and set radio-profile name short-retry are removed. The retry counts are reset to their default values and must be reconfigured manually, in the service profiles.

In addition, MSS automatically adds a new option, encrypted, to set radius and set radius server commands that use the key option. The encrypted option encrypts the key string displayed in the configuration.

The option encrypts display of the string but does not encrypt the actual string sent to RADIUS servers. RADIUS servers still receive the string that was entered with the set radius or set radius server command in MSS Version 4.0.

To ensure that the command change is saved after you upgrade, after you load the new image and restart the