Fast Ethernet Hubs
OfficeConnect
Fast Ethernet Hubs
Fast Ethernet networking quite simply means faster
for monitoring network activity.
OfficeConnect Hub TP400 3C16723
The OfficeConnect Hub TP400 is the most
■Four
■Class II Fast Ethernet repeater lets you easily connect two Fast Ethernet hubs
OfficeConnect Hub TP1200 3C16721
The OfficeConnect Hub TP1200 provides 12
■Twelve
■Class II Fast Ethernet repeater lets you easily connect two Fast Ethernet hubs
OfficeConnect Dual Speed Hub 8 3C16750
The OfficeConnect Dual Speed Hub 8 lets you connect both Ethernet and Fast Ethernet workstations and devices. Ideal for those wishing to extend an existing Ethernet network into Fast Ethernet, the Dual Speed Hub 8 provides a
■Eight
■
■Class II Fast Ethernet repeater lets you easily connect two Fast Ethernet hubs
OfficeConnect Hub TP1200
H u b
OfficeConnect Hub TP800 3C16722
The OfficeConnect Hub TP800 pro- vides eight unmanaged
■Eight
■Class II Fast Ethernet repeater lets you easily connect two Fast Ethernet hubs
Fast Ethernet (100 Mbps) Configuration Rules
All OfficeConnect Fast Ethernet hubs are Class II. You can directly connect two Class II Fast Ethernet hubs (Class I hubs cannot be directly connected to other
Fast Ethernet hubs). The total length of cable (A+B+C below) between two workstations and a nonrepeater piece of equipment (such as a switch), must not exceed 205 m (672 ft). Each cable (A, B, or C) must not exceed 100 m (328 ft).
3Com recommends that Category 5 cables be used and that the cable
(B)between the Fast Ethernet hubs is not longer than 5 m (16.4 ft). This allows the maximum
100 Mbps link
|
| Workstation | |
Switch | A |
|
|
|
| B | |
|
|
| |
|
| Hub |
|
|
|
| C |
|
|
| Hub |
Example: |
|
| Workstation |
|
| 100 m | |
|
| (328 ft) | |
Workstation |
|
| |
|
|
| 5 m |
| Speed | (16.4 ft) | |
Dual |
| ||
8 |
| 100 m | |
Hub |
| ||
|
| ||
|
|
| (328 ft) |
|
| 100 | Mbps |
|
|
| |
|
| Hub | |
|
|
| Workstation |
s & S w i t c h e s
5