SECUR – ET VPC Pole Clamp
The VPC pole clamp can be used along with the iQ10 yoke bracket to suspend the loudspeaker from an overhead bar, truss or suitable structure. Only the parts supplied should be used to secure the VPC to the yoke bracket.
The following items are included with each VPC:-
Description | Quantity |
VPC Pole Clamp | 1 |
M10 Washer | 1 |
M10 x 50mm Screw | 1 |
M10 Nyloc Nut (Black) | 1 |
SECUR ET – VEB Eyebolt
The Tannoy iQ 10C & iQ 10PC loudspeakers can be flown with high quality VEB M10 eyebolts with collar to BS4278:1984. The loudspeakers are equipped with internal steel braces, which also double as the flying points, and accept VEB M10 eyebolts.
To install the VEB M10 eyebolts remove the original M10 counter sunk screws from the locations you wish to install the VEB M10 eyebolts. Then replace these counter sunk M10 screws with the VEB M10 eyebolts. The kelping brackets on the rear of the cabinet should only be used for tilting the loudspeaker to the desired angle.
! ! | Important: It is imperative for safety reasons |
| |
| that two eyebolts linked to two independently |
| fixed straps are used per cabinet. |
| Never attempt to use formed eyebolts i.e. |
| formed from a steel rod and bent into an eye. |
|
|
11
