Passive System Parameters (iQ 10P & iQ 10PC)
With the vast array of digital loudspeaker management systems available it is inevitable that the user may opt to use a controller other than the TDX1 or TDX2 as part of a large scale integrated system. Use the parameters in the table below for optimised performance:-
Parameter | Unit/Name |
|
|
|
|
Gain | (dB) | User definable |
Delay * | (ms) | 3.58 |
Polarity |
| Positive |
|
|
|
HPF | Freq (Hz) | 180 |
| Slope (dB/oct) | 24 |
| Filter Shape | Linkwitz Riley |
|
|
|
LPF | Freq (Hz) | Thru |
| Slope (dB/oct) | NA |
| Filter Shape | NA |
|
|
|
|
|
|
PEQ 1 | Freq (Hz) | 2000 |
| Level (dB) | |
| Type | Parametric |
| Q / Bandwidth | 0.8 / 1.25 |
|
|
|
ÄNote Apply only when an iQ 10 is stacked directly on top of an iQ 18 Sub bass. Otherwise only apply delay to compensate for distance between relevant sources.
20
