Accessing the Setup Wizard 31
Bridge Mode (for a single PC) (RFC 1483 Bridged Mode)
To set up the Router for use with an RFC1483 bridged connection:
Figure 19 Bridged Mode Configuration Screen
1Enter your VPI and VCI information in the VPI/VCI text boxes.
2Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down list. This information will have been provided to you by your
ISP.
3Check all of your settings, and then click Next. The Wireless Settings
screen is displayed.
Figure 20 Wireless Settings Screen
4Set the Wireless Channel you want to use from the Channel drop-down
list.
5Specify the SSID to be used by your Wireless Network in the SSID field. If
there are other wireless networks in your area, you should give your
wireless network a unique name.