32 CHAPTER 4: RUNNING THE SETUP WIZARD
Routing Mode over ATM (RFC 1483 Routed Mode)
To set up the Router for use with an RFC1483 routed connection:
Figure 21 Routing Mode Screen
1Enter your Internet IP address in the WAN IP text box.
2Enter the subnet mask in the Subnet Mask text box.
3Enter the default router in the Default Gateway text box.
4Enter the DNS address in the DNS text box.
5Enter your VPI and VCI information in the VPI/VCI text boxes.
6Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down list. This information will have been provided to you by your
ISP.
7Check all of your settings, and then click Next.The Wireless Settings
screen is displayed.
Figure 22 Wireless Settings Screen