3D Connexion 7300 manual Interactive Documentation CD-ROM

User Safety Summary

■The printer is heavy, and must be lifted by three people. The illustration below shows the proper technique for lifting the printer.

Note

Do not use the Multi-Purpose Tray or Left Side Output Tray to lift the printer.

68 kg

149 lbs.

7300-53

■Follow the recommended procedure when moving the printer from one location to another. You can find this procedure in the Moving Guide printable page located in the Setup Guide on the

Interactive Documentation CD-ROM.

■Do not place any liquids on the printer.

Warning

Be careful when working in areas inside the printer identified with a warning symbol. These areas may be very hot and could cause personal injury.

■Wait 10-15 seconds between switching the printer off and on.

■Keep hands, hair, neckties, etc., away from the exit and feed rollers.

Phaser® 7300 Color Printer 16