3M 10500 manual Specifications

Specifications

1.Tape:

For use with Scotch® pressure-sensitive film box sealing tapes.

2.Tape Width:

48 mm [2 inches] minimum to 72 mm [3 inches] maximum.

3.Tape Roll Diameter:

Up to 405 mm [16 inches] maximum on a 76.2 mm [3 inch] diameter core. (Accommodates all system roll lengths of Scotch® film tapes.)

4.Tape Application Leg Length - Standard:

70 mm ± 6 mm [2-3/4 inches ±1/4 inch]

Tape Application Leg Length - Optional:

50 mm ± 6 mm [2 inches ± 1/4 inch] (See "Adjustments – Tape Leg Length.")

5.Box Size Capacities:

For use with center seam regular slotted containers.

Minimum

Length – 150 mm [6 inches]

Height – 120 mm [4-3/4 inches] (most “3M-Matic” Case Sealers) 90 mm [3-1/2 inches] (with optional 2 inch leg length)

Width – 150 mm [6 inches]

Maximum

Unlimited

Limited by

Case Sealer

When upper and lower taping heads are used on “3M-Matic”case sealers, refer to the respective instruction manual specifications for box weight and size capacities.

6. Operating Rate:

Conveyor speeds up to 0.40 m/s [80 FPM] maximum.

7.Operating Conditions:

Use in dry, relatively clean environments at 5° to 40° C [40° to 105° F] with clean dry boxes.

Important – Taping heads should not be washed down or subjected to conditions causing moisture condensation on components.

8.Taping Head Dimensions:

Length	–	457 mm [18 inches]
Height	–	560 mm [22 inches] (with tape drum)
Width	–	130 mm [5-1/8 inches] (without mounting spacers)
Weight	–	Packaged: 8.2 kg [18 lbs.] Unpackaged: 7.3 kg [16 lbs.]

4