SAFETY POINTS TO NOTE:
Use an alternating current only. Check that the supply voltage is the same as that stated on the rating plate of the appliance.
U.K. only! How to connect the flex to a plug:
IMPORTANT - The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow | Earth |
Blue | Neutral |
Brown | Live |
Please read the instructions given below before connecting the flex to a plug.
If in doubt, please consult a qualified electrician. As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal which is marked with the letter E, or the symbol <> , or coloured green or green and yellow.
The wire which is marked brown must be connected to the terminal which is marked with the letter L or coloured red.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
Replacement fuses of 10 amp should be used which have A.S.T.A. and B.S. 1362 approval.
Attention:
The plug, if severed from the mains lead, must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
English: | The models 1700 series fulfill 73/23/EEC, 89 / 336 EEC. |
Français: | Le type 1700 est conforme à 73 / 23 / EEC, 89 / 336 EEC. |
Deutsch: | Das Model 1700 erfüllt 73/23/EEC,89/336 EEC. |
Español: | El modelo 1700 cumple las normas 73/23/EEC y 89/336 EEC. |
Italiano: | Il modello 1700 è conforme alle norme 73 / 23 / EEC, 89 / 336 EEC. |
Norsk: | Modellen 1700 oppfyller 73/23/EEC,89/336 EEC. |
Nederlands: Dit model 1700 is conform met 73 / 23 / EEC, 89 / 336 EEC. | |
Português: | O modelo 1700 cumpre as normas 73 / 23 / EEC, 89 / 336 EEC. |
6 | 3M 1700 Operator’s Guide |
