Important Safety Instructions
SAVE THESE INSTRUCTIONS
Read all instructions before using this product.
3M™ Scotch-Weld™ Polyurethane
Reactive (PUR) Easy 250 Adhesive
IMPORTANT: For additional health and safety information, see product label and Material Safety Data Sheet for
!WARNING
Use only with 3M™
Reactive (PUR) Easy 250 Adhesive Cartridges. Use with any other materials may cause hazardous conditions.
!WARNING
3M™
Cartridges in ovens or other heating devices or use in other applicators. May cause hazardous conditions.
!WARNING
Do not heat or expose 3M™
Vapors of heated material may be irritating to eyes and respiratory tract and may cause
!WARNING
Do not clean or remove 3M™
Polyurethane Reactive (PUR)Adhesive with heat, flame, or solvent. May cause hazardous vapor
or fire.
!WARNING
Avoid Contact with flammable materials
3M™
!WARNING
To reduce the risk of electrical shock or injury while operating or servicing the 3M™
1.Operate and service the applicator only as described in this manual.
2.Connect the applicator only to a properly grounded outlet.
3.Do not unplug the applicator by pulling on the cord. Grasp the plug, not the cord, to unplug.
4.Do not handle the plug or applicator with wet hands.
5.Do not use the applicator outdoors or on wet surfaces.
6.Do not use the applicator with damaged cord or plug.
7.Do not use the applicator if it is not working properly or has been dropped, damaged, submerged in water, or left outdoors.
!WARNING
Use only
grounded outlet. Failure to use properly grounded plug and outlet may cause electrical shock.
IMPORTANT: If you are not sure of proper connections, get help from a qualified electrician or service person.
!WARNING
Do not use an unapproved extension cord with the applicator. Use an extension cord which complies with NEC requirements and state and local codes and other requirements.
IMPORTANT: Use of an improper extension cord may cause electrical shock.
!Caution
Avoid contact with top surface and metal heating
chambers of preheater during use and hot adhesive cartridges and adhesive. May cause burns.
IMPORTANT: Wear heat resistant gloves and safety glasses when using.
©3M 2007 January | 3M™ | 1 |