3M 39600 manual Important Safeguards, Knife Warning Label

Important Safeguards

This safety alert symbol identifies important messages in this manual.

READ AND UNDERSTAND THEM BEFORE INSTALLING OR OPERATING THIS EQUIPMENT.

Important –In the event the following safety labels are damaged or destroyed, they must be replaced to ensure operator safety. For safety and information replacement labels, see Parts Illustrations/Lists, Section I, pages 64 and 65.

The "Warning – Hazardous Voltage"label, shown in Figure 1-2, is attached to the cover of the electrical box. The label warns service personnel to unplug the power supply before attempting any service work on the case sealer.

Two "Warning Sharp Knife" labels, shown in Figure 1-1, are attached to the sides of the upper frame at the location of the cut-off knife on the upper taping head. The labels warn operators and service personnel of the very sharp knife used to cut the tape at the end of the tape application.

Figure 1-1 – Knife Warning Label

Figure 1-2 – Electrical Warning Label

The two "Warning – Keep Away From Moving Belts" labels, shown in Figure 1-3, are located on the side of the drive belt assemblies at the infeed end. The labels warn operators and service personnel to keep hands away from this area when the drive belts are running.

Figure 1-3 – Hands Warning Label

3