3M 3M 1700 manual Color Tuning Dial, Lamp Replacement

Color Tuning Dial

Rotate the color tuning dial (if equipped) to eliminate the yellow/orange to brown or blue corners on the screen.

1.Rotate dial to the left to remove blue corners.

2.Rotate dial to the right to remove yellow/orange to brown corners.

Lamp Replacement

Use the proper lamp type for your projector.

ENX ± 82V, 360W 78-6969-8027-1

To replace the lamp:

1.Turn projector off and unplug (1) the power cord.

2.Allow projector lamp and metal parts to cool.

3.Release cover latch (2) and lift up top cover to access lamp (3).

4.Depress lever (4) to release lamp. Discard old lamp.

5.Push new lamp (5) fully and squarely into socket.

6.Close the top cover.

!Caution

To avoid burns to the fingers, allow projector parts to cool before replacing lamp.

!Caution

If a lamp cracks or breaks and deposits glass fragments inside the projector body, use a vacuum cleaner to remove. Touching sharp glass could result in cuts to your fingers.

2

1 3

4 5

!Caution

Use care when placing hands inside projector body. Sharp or rough edges could cause abrasions or cuts to fingers.

!Caution

When the top cover is in the open position, use care not to tip it over. If the cover slams shut, it could result in pinching or bruises to your fingers.

3M 1700 Operator's Guide Page 4