Intended USE, Setup Instructions | 3M 3M 1700 specification

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3M Overhead Projector 1700 was designed, built and tested for use indoors, using 3M brand lamps and nominal local voltages. The use of other replacement lamps, outdoor

IMPORTANT SAFEGUARDS

When using your photographic equipment, basic safety precautions should always be followed, including the following:

1.Read and understand all instructions before using. Pay particular attention to areas where this symbol ! is shown.

2.Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.

!3. Care must be taken as burns can occur from touching hot parts.

!4. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged Ð until it has been examined by a qualified serviceman.

!5. Position the cord so that it will not be tripped over, pulled or contact hot surfaces.

6.If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.

7.Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Never yank cord to pull plug from outlet. Grasp plug and pull to disconnect.

!8. Let appliance cool completely before putting away or when replacing lamp. Loop cord loosely around appliance when storing.

9.To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.

Setup Instructions

1.Remove bolts (1) from projector body.

2.Align post holes (2) with mounting holes on projector.

3.Insert bolts (3) through post holes and turn finger tight.

4.Use wrench (4) to tighten bolts and secure post to projector body.

operation or different voltages has not been tested, and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

10.To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is used subsequently.

11.The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.

12.Connect this appliance to a grounded outlet.

13.Disconnect this unit from its source of supply before replacing the projection lamp.

!14. This unit is equipped with optical lenses and should not be exposed to direct sunlight.

15.Keep ventilation openings free of any obstructions.

16.This unit is assembled with a special power cable that, if damaged, must be replaced by the same type of cable. This power cable can be ordered from your local 3M Visual Systems Division Dealer and must be installed by a serviceman.

SAVE THESE

INSTRUCTIONS

The information contained in this manual will help you operate and maintain your overhead projector.

Note		Important
Post bolt wrench (4) is taped to the projection post.		Important
Post bolt wrench (4) is taped to the projection post.		Tighten bolts (1) with equal pressure.g
		Tighten bolts (1) with equal pressure.g

3M 1700 Operator's Guide

Page 1

3M 1700 specifications

The 3M 1700 is a versatile and innovative solution designed for a wide range of applications in industries such as manufacturing, healthcare, and consumer goods. This product boasts a unique combination of features and technologies that make it a reliable choice for both professionals and DIY enthusiasts.

One of the standout features of the 3M 1700 is its exceptional adhesion capabilities. Utilizing advanced adhesive technologies, this product ensures a strong bond to various surfaces, including metals, plastics, and wood. This quality makes it an ideal solution for fabrication, repair, and assembly tasks. Additionally, the 3M 1700 is engineered to maintain its adhesive strength over time, even in challenging environmental conditions, ensuring durability and long-lasting performance.

Another important characteristic of the 3M 1700 is its user-friendly design. The product is easy to apply, allowing for quick and efficient usage. This is particularly beneficial in fast-paced work environments where time is of the essence. Moreover, the 3M 1700 is available in different formats, including tapes and sheets, providing flexibility to meet the specific needs of various projects.

In terms of its physical properties, the 3M 1700 exhibits excellent shear strength and tensile properties. This means that it can withstand significant stress without failing, making it suitable for applications that require robust performance. Furthermore, the product is resistant to moisture, chemicals, and temperature fluctuations, which further enhances its versatility in diverse industrial settings.

The 3M 1700 also incorporates safety technology that sets it apart from competitors. It is designed to comply with stringent regulatory standards, ensuring that it is safe for use in sensitive environments, such as hospitals and laboratories. Additionally, the product is low in volatile organic compounds (VOCs), promoting a healthier work environment.

Overall, the 3M 1700 represents a sophisticated solution that combines advanced adhesion technologies with practical features, making it a go-to choice for professionals seeking reliable performance. Its durability, ease of use, and compliance with safety standards solidify its reputation as an essential tool in various applications. Whether for industrial uses or DIY projects, the 3M 1700 is designed to meet the demands of today's fast-paced and evolving landscape.

3M 3M 1700 manual Intended USE, Setup Instructions

Models: 3M 1700