System Configurations
Power requirements
A dedicated power line is recommended but not required.
Voltage | 100/120 VAC 50 or 60 Hz | 220/240 VAC 50 or 60 Hz |
Amperes | 1.8 A @ 100/120 VAC | 1.0 A @ 220/240 VAC |
WARNING
To reduce the risks associated with hazardous voltage:
•Do not use the product if the case, covers, or power cord are damaged.
•Do not attempt to modify, service, or
Detection zone
The primary zone of detection is in areas where patrons typically carry items. The electronic coverage in this zone is not 100%, however, the rate of detection is effective to deter the loss of protected materials. It is important to watch for suspicious actions such as holding materials above or outside the lattices when passing through the system.
Indicators
Type | Description |
Power indicator | Green LED on the electronics enclosure indicates power on. |
|
|
Slave indicator | Yellow LED on the electronics enclosure indicates that 2 controllers are connected. |
|
|
Lattice alarm lights | Indicates an Alarm. |
|
|
Audible alarm |
|
|
|
Alarm outputs
Visual | Visual alarm indicator lights are located on top of each lattice. If the lights are on, an alarm condition has |
| occurred. |
Audio | An audible alarm speaker is mounted on each lattice. Alarm volume can be adjusted by a technician. |
10 | Copyright © 2008. 3M. All rights reserved. |
