25
If your projector does not seem to be functioning properly, check the items below before you
contact an authorized service center.
Symptom Check Point
The projector can not be
turned on.
• Ensure the battery is fully charged or the AC power adapter
is properly connected.
The projected image is
too dark.
• Use the projector in a darker environment.
• Increase the brightness by using the AC power adapter.
• Project the image on a at, white surface.
• Decrease the size of projected image.
The projected image
is dim.
• Adjust the focus. Please refer to “Adjusting the Focus”
section.
• Check if the lens is dirty.
• Replace with an image of higher resolution.
The image is not played.
• Ensure the image format is compatible.
• Replace with another le or memory card.
• Convert the le with the attached AMC software.
No image is projected
when an AV device is
connected.
• Ensure the connected device is equipped with AV-out
function.
• Check if the AV Cable is connected, and the projector is
switched to AV-in function.
• Check if the AV Cable is plugged correctly.
The surface temperature
of projector feels warm.
It is normal for this projector to generate moderate heat
during normal operation. Always keep the ventilation slots
free of dirt or obstructions and operate the projector in a
properly ventilated environment.
Troubleshooting