3M MP160 Charge the Battery, 110

English

3M™ Pocket Projector MP160

Charge the Battery

The rechargeable battery gives you up to two hours of battery life. When the battery needs to be charged, the status indicator will flash red. The battery should be fully charged before using the projector.

Charge the battery by connecting the power adapter to the projector.

1Turn the projector power off.

2Connect the power adapter to the projector’s DC input.

3Connect the other end of the power adapter into the electrical outlet.

4The status indicator will change to amber while the battery is charging.

5Allow three hours to fully charge the battery. When charging is complete, the status indicator will turn off.

110–240 VAC 50/60 Hz

Note: The battery status will not appear when the power adapter is connected to the projector. The power adapter icon will appear instead.