3M™ Pocket Projector MP160

Connecting to a Component Video Device

For component video input, you must purchase the optional 3M MP160 Component AV Cable [3M part number 78-6972-0032-3]. This cable sends a higher quality video signal for the best possible image.

1Connect the component AV cable to the projector’s VGA-AV input.

2Connect the other end of the AV cable to the video device’s audio and video outputs.

English

Important Note: There are two red connectors on the Component AV cable. One is for the right audio channel and the other is for the Pr component video signal. Be careful to connect the red audio to red audio and red video to red video. If these connectors are switched, the projected image will appear green and an abnormal noise will come from the right speaker.

Tip: Some video devices do not have the standard audio and video connections and may require an AV cable specified by the manufacturer. The AV cable allows you to connect your video device to your TV monitor or your projector and may be purchased from the video device manufacturer. Once you have the AV cable, use the cable adapters to connect the video device cable and the projector cable.

Some video devices, by default, will not output a video signal. The video device’s manual should provide instructions on how to change the video output setting.

© 2010 3M. All Rights Reserved.

15