,QWURGXFWLRQ
Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER
Safety Instructions
1.Read all of these instructions before you operate your projector and save them for future reference.
2.The lamp becomes extremely hot during operation. Keep the projector cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond rated life could cause them to explode in rare occasions.
3.Power is still available when the projector is in the standby mode. Never replace lamp assembly or any electronic components unless the projector is unplugged.
4.To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used.
5.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
6.This product is capable of displaying inverted images for ceiling mount configurations. Please use suitable equipment for mounting the unit and make sure it is securely installed.
7.To prevent the lamp from bursting, change the lamp after changing the mounting position of the projector (desktop to ceiling mount or ceiling mount to desktop mount).
Caution
•Always open the lens shutter or remove the lens cap when the projector lamp is on.
•Do not look straight at the projector lens during operation. The intense light beam may damage your eyesight.
•In some countries, the line voltage is NOT stable. This projector is designed to
operate safely within a bandwidth of 110 to 230 volts, but could fail if power drops or surges of ± 10 volts occur. In these
Save These Instructions: The information contained in this manual will help you
operate and maintain your 3M™ MP7720 Personal Projector.
1 | 3M™ Personal Projector MP7720 | © 3M IPC 2000 |
|
|
|
