Safeguards

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3M™ Multimedia Projector MP8620 was designed, built and tested for use indoors, using 3M™ brand lamps and nominal local voltages. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

IMPORTANT SAFEGUARDS

1.Read and understand all instructions before using. Pay particular attention to areas where this symbol

!is shown.

!WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

!Caution - Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices.

2.Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.

3.Never look directly into the projector lens when the lamp is on. The metal halide lamp produces a strong light which could damage your eyesight.

!4. Care must be taken as burns can occur from touching hot parts.

5.Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged — until it has been examined by a qualified service technician.

!6. Position the cord so that it will not be tripped over, pulled or contact hot surfaces.

7.If an extension cord is necessary, a cord with an earth/ground and a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.

8.Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect.

9.To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.

10.To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

11.The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.

12.Connect this appliance to a grounded outlet.

!13. This unit is equipped with optical lenses and should not be exposed to direct sunlight.

14.Keep ventilation openings free of any obstructions.

15.Use caution not to pinch fingers when folding projector into closed position.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you operate and maintain your 3M MP8620 Multimedia Projector.

©3M 1997

3M™ Multimedia Projector MP8620

1

Page 1 Page 3
Page 2
Image 2
3M MP8620 manual Safeguards, Intended USE
Page 1 Page 3

MP8620 specifications

The 3M MP8620 is a state-of-the-art printing material designed for high-quality digital graphics. This innovative product is part of 3M's extensive lineup of solutions aimed at enhancing the capabilities of graphic designers, printers, and marketers. With its array of advanced features and technologies, the MP8620 has quickly become a go-to choice for businesses looking to create stunning visuals that stand out.

One of the key characteristics of the 3M MP8620 is its superior print quality. The material is engineered to deliver vibrant colors and sharp images, making it ideal for a wide range of applications, including banners, posters, and wall graphics. The advanced ink technology used in the MP8620 ensures excellent adhesion and durability, allowing prints to withstand varying environmental conditions without fading or peeling.

Another notable feature of the 3M MP8620 is its versatility. This printing material is compatible with a variety of printers, including eco-solvent and UV printers, which allows for greater flexibility in production processes. Whether users are creating indoor displays or outdoor promotions, the MP8620 can be utilized effectively in different settings.

The technology behind the MP8620 includes a unique microsphere construction that enhances both visual appeal and performance. This construction provides an exceptionally smooth surface, ensuring that ink spreads evenly for consistent results. Additionally, the material is designed to resist common issues such as wrinkling and curling, which can compromise the integrity of printed graphics.

Another advantageous feature of the 3M MP8620 is its ease of application. The film is designed for quick and efficient installation, reducing labor costs and minimizing setup time. This characteristic is particularly beneficial for businesses that require rapid turnaround times for their projects.

In summary, the 3M MP8620 is a high-performance printing material that excels in quality, versatility, and ease of use. Its advanced technologies and characteristics make it a favored choice among professionals in the graphics industry. By choosing the MP8620, businesses can achieve stunning visual results that capture attention and communicate their message effectively. Whether for promotional displays or artistic endeavors, the 3M MP8620 proves to be an excellent investment for achieving excellence in printing.
Top Page Image Contents