4.2 How To Use Height Adjustment Feet
Adjust the image elevation using the height adjustment at the front of the projector.
1.Raise the front end of the projector so the feet are not touching the table top.
2.Move the lock lever to the unlock position.
3.Extend or retract each foot to the desired height.
4.Move the lock lever to the lock position.
5.For fine adjustments, rotate each foot.
Caution
Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock completely, turn the foot adjusters slightly before locking.
Front view
unlock ← | → lock |
Foot adjusters
Side view
VIDEO | L | AUDIO |
|
| |
| R |
| |||
1 |
|
| RGB IN | ||
|
|
|
|
2
AUDIO | AUDIO |
IN | |
| OUT |
1 | 2 |
RGB OUT
K
CONTROL
Figure 4.3 Height Adjustment
ENGLISH
© 3M 1999 | 3M™ Multimedia Projector MP8740 | 9 |
