Safeguards

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3M™ Multimedia Projector 8755/ 8755L/8770/8770Lwas designed, built and tested for use indoors, using 3M™ brand lamps, 3M™ brand ceiling mount hardware and nominal local voltages. This projector is not intended for household use. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

IMPORTANT SAFEGUARDS

1.Read and understand all instructions before using.

Pay particular attention to areas where this symbol is shown.

WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Caution - Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices.

Note - Used to emphasize important conditions or details.

2.Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.

3.Never look directly into the projector lens when the lamp is on. The high pressure mercury lamp produces a strong light which could damage your eyesight.

4.Care must be taken as burns can occur from touching hot parts.

5.Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged – until it has been examined by a qualified service technician.

6.Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.

7.If any extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.

8.Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect.

9.To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.

10.To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when service or repair work is required. Incorrect assembly can cause electric shock when the appliance is subsequently used.

11.Connect this appliance to a grounded outlet.

12.Do not expose this projector to direct sunlight, or use it outside.

13.Keep all ventilation openings free of any obstructions.

14.Always open the lens shutter or remove lens cap when the projection lamp is on.

15.Do not look directly into light beam of laser pointer. The pointer produces a strong light which could damage your eyesight.

16.The projection lamp contains mercury. Always dispose of it in a proper manner according to local regulations.

17.To avoid premature lamp failure, do not change the mounting position of the projector (desktop ceiling mount or ceiling desktop mount) and continue to use the same lamp.

18.Always operate machine on a flat, sturdy surface.

ENGLISH

© 3M 2000

3MMultimedia Projector MP8755/MP8755L/MP8770/MP8770L

3

Page 5
Image 5
3M MP8770/MP8770L, MP8755/MP8755L manual Safeguards, Intended USE

MP8755/MP8755L, MP8770/MP8770L specifications

The 3M MP8770 and MP8770L, as well as the MP8755 and MP8755L models, represent the forefront of advanced imaging and printing technology. 3M, known for its innovation and commitment to quality, has developed these models to cater to a diverse range of professional applications, enhancing productivity while delivering exceptional output quality.

The 3M MP8770 and MP8770L models are designed for high-volume environments requiring durable and reliable performance. One of their standout features is the ability to print on a wide variety of substrates. This flexibility makes them ideal for applications ranging from signage and displays to vehicle graphics and wall coverings. With high-resolution print capabilities, these models ensure that even the most intricate designs are reproduced with remarkable clarity, helping businesses to create visually striking materials.

A critical technology underpinning the 3M MP8770 and MP8770L is the use of advanced ink formulations. These inks are specially engineered for durability, ensuring that printed materials can withstand the rigors of both indoor and outdoor conditions. In addition, these models boast excellent color consistency, with the ability to reproduce a wide color gamut, allowing for brilliant and vibrant graphics that capture the viewer's attention.

The MP8755 and MP8755L models also share many of these advanced features, while specifically targeting users who need an efficient and cost-effective solution. They offer similar substrate versatility and high-quality output, making them suitable for both short-run and high-volume production needs. The technologies implemented in these models lend themselves to faster print speeds and reduced ink consumption, contributing to lower operational costs.

Another notable characteristic of 3M's printer lineup is the integration of user-friendly software and connectivity options. This enhances workflow efficiencies by allowing users to manage print jobs easily from various devices or software platforms. The combination of reliability, speed, and quality positions the 3M MP8770/MP8770L and MP8755/MP8755L models as excellent choices for professionals in the digital printing space, boosting productivity and maintaining high standards of quality in graphic output.

Overall, the 3M MP series printers stand as a testament to 3M’s dedication to pushing the boundaries of printing technology, making them ideal for professionals who demand the best in quality, efficiency, and versatility.