Operating
Selecting an input signal (continued)
1. Press the VIDEO button on the remote control.
Each time you press the button, the projector switches its input port as below.
VIDEO
COMPUTER/ STANDBY/ON VIDEO STORAGE SEARCH
ASPECTBLANK
MAGNIFY | HOME | PAGE UP VOLUME |
● If the VIDEO button is pushed to switch from a signal from the |
| END PAGE DOWN MUTE |
FREEZE MY BUTTON KEYSTONE | ||
COMPUTER IN1, COMPUTER IN2 or USB STORAGE port, |
|
|
when TURN ON is selected for the AUTO SEARCH item in the | POSITION | MENU |
OPTION menu (37), the projector will check the |
| ENTER |
first. If no input is detected at the port, the projector will check the VIDEO port.
Searching an input signal
1. Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to find any input signals.
When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.
COMPUTER IN1 COMPUTER IN2 VIDEO
SEARCH
COMPUTER/ STANDBY/ON VIDEO STORAGE SEARCH
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
| END | PAGE DOWN | MUTE |
FREEZE | MY BUTTON | KEYSTONE |
POSITIONMENU
●Selecting the USB STORAGE port displays the THUMBNAIL menu. For ENTERmore information, please see the “USB STORAGE” (49).
Selecting an aspect ratio
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect ratio in turn.
ASPECT
COMPUTER/ STANDBY/ON VIDEO STORAGE SEARCH
For a PC signal or a signal from the USB STORAGE | ASPECT | AUTO BLANK |
NORMAL 4:3 16:9 SMALL | MAGNIFY | HOME PAGE UP VOLUME |
For a video signal, s-video signal or component video signal
4:3 16:9 14:9 SMALL
For no signal
4:3 (fixed)
●The ASPECT button does not work when no proper signal is inputted.
●The NORMAL mode keeps the original aspect ratio setting.
●Performing the automatic adjustment initializes the aspect ratio setting.
15