Quick start guide

CL82101/CL82201/CL82301/CL82351/CL82401/CL82451/

CL82501/CL82551/CL82601

Quick reference guide

Initial settings

We recommend you program your telephone system before use.

The following are a few examples of common features to set before using the

This quick start guide provides you with basic instructions only. For more complete instructions, refer to your Abridged user’s manual provided in the package, or see the online Complete user’s manual at www.telephones.att.com/manuals.

Telephone base installation

qCID/VOLUME

Show caller ID history.

Scroll down in menus.

Move cursor to the left when entering names or numbers.

Decrease listening volume when on a call, or decrease message playback volume.

Handset pDIR/VOLUME

Show directory entries.

Scroll up in menus.

Move cursor to the right when

entering names or numbers.

• Increase listening volume when on a call, or increase message playback volume.

telephone. Refer to the Handset settings and Answering system settings in the Abridged user’s manual or the online Complete user’s manual for detailed instructions on setting all telephone features.

Set date/time

Set the date/time before using the answering system.

1. MENU ->q or p ->Set date/time ->SELECT.

Route the cords through the slot.

Raise the antenna.

If you have DSL high-speed Internet service, a DSL filter (not included) is required.

Plug the power cord and telephone line cord into the jacks.

Plug the other end of the telephone line cord into a telephone jack or a DSL filter.

Charger installation

Plug the power

adapter into an

electrical outlet not controlled by a wall switch.

MUTE/DELETE

Mute the microphone during a call.

Delete the displayed entry while in the directory, call log or redial list.

Delete digits or characters when using the dialing keys.

PHONE/FLASH

Make or answer a call.

Answer a call waiting call during a call.

1

Press repeatedly to add or remove 1 in front of the call log entry before dialing or saving it to the directory.

TONE

Press to switch to tone dialing temporarily during a call if you have pulse service.

/SPEAKER� �

Switch between the speakerphone and handset.

MENU/SELECT

Show the menu.

Select an item or save an entry or setting while in the menu.

OFF/CANCEL

• Hang up a call.

• Press to cancel an operation, back up to the previous menu, or exit the menu display, or press and hold to return to idle mode

Press and hold in idle mode to

erase missed call indicator.

REDIAL/PAUSE

Press repeatedly to view the last 10 numbers dialed.

Press and hold to insert a dialing pause while entering numbers.

# (pound key)

Press repeatedly to display other dialing options when reviewing a caller ID log entry.

EQ

Change the audio quality to best suit your hearing.

2. q or p to choose month, or enter the number -> SELECT.

3. q or p to choose day, or enter the number -> SELECT.

4. q or p to choose year, or enter the number -> SELECT.

5. q or p to choose hour, or enter the number -> SELECT.

6. q or p to choose minute, or enter the number -> SELECT.

7. q or p to choose AM or PM -> SELECT.

Record your own announcement

Your outgoing announcement plays when calls are answered by the answering system. You can use the preset announcement to answer calls, or replace it with your own recorded announcement.

1.MENU ->q or p ->Answering sys ->SELECT.

2.SELECT to select Announcement.

3.q or p ->Record annc ->SELECT.

4.Facing the handset, record your announcement and press 5 to end recording.

Number of rings

You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6 rings, or toll saver. If you choose toll saver, the answering system answers a call after 2 rings if you have new messages, and after 4 rings when there are no new messages.

If you want the built-in answering system instead of the voicemail to answer a call, you should set the answering system to answer a call at least 2 rings before the voicemail is set to answer. Contact your telephone service provider

Caution: Use only the power adapter provided with this product. To obtain a replacement, visit

our website at www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

Battery installation

Install the battery as shown below. Charge your handset(s) before initial use. The battery is fully charged after 10 hours of continuous charging.

1

2

3

Handset side view

Push to talk

• Initiate a one-to-one or one-to-group broadcast.

Press and hold to broadcast to a group of handsets.

Telephone base

for information on your voicemail settings.

1.MENU ->q or p ->Answering sys ->SELECT.

2.q or p ->Ans sys setup ->SELECT.

3.q or p -># of rings ->SELECT.

4.q or p -> Choose among 2, 3, 4, 5, 6 or Toll Saver ->SELECT.

Handset ringer volume

You can set the ringer volume level to one of the six levels or turn the ringer off.

1.MENU ->q or p ->Ringers ->SELECT.

2.SELECT to select Ringer volume ->SELECT.

3.q or p to choose the desired level -> SELECT.

Language

If you want to change the display language, or you have accidentally changed

BY 1021

BT183342/BT283342 2.4V 400mAh Ni-MH

/ANSWER ON

Turn the built-in answering system on or off.

Message counter

X/DELETE

• Delete the message currently playing.

• Press twice to delete

all old messages when

the language and want to switch it back to English, follow the steps below.

1.MENU -> q 7 times -> SELECT twice.

2.q or p to choose the desired language, or choose English if you want to change the display language to English -> SELECT.

1. Plug the battery

2. Align the cover

connector securely

flat against

into the socket inside

the battery

the handset battery

compartment,

compartment, matching

then slide it

the color-coded label.

upwards until it

Insert the supplied

clicks into place.

battery with the label

 

THIS SIDE UP facing up

 

as indicated.

 

3.Charge the handset by placing it face forward in the telephone base or charger.

Shows the number of messages or other answering system information.

/REPEAT

Repeat a message.

Press twice to play the previous message.

/PLAY/STOP

Start or stop message playback.

in idle mode.

q/VOL/p

• Adjust the listening volume during message playback.

Adjust the base ringer volume when in idle mode.

/SKIP

Skip to the next message.

Use only the supplied rechargeable battery or replacement battery (model BT166342).

Page 1
Image 1
A & T International CL82401, CL82451, CL82201, CL82601, CL82351, CL82301, CL82101 manual Quick reference guide Initial settings