JVC AV-29MT36, AV-21MT36 Customized setting, VIDEO-2 Setting Setup Tour, Display, Language

Customized setting (continued)

VIDEO-2 SETTING SETUP TOUR

You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal.

Select the VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT).

You may use the SETUP TOUR function to perform the initial setting. When selecting SETUP TOUR, the AUTO PROGRAM menu and CHANNEL SUMMARY menu will be displayed as shown on page

8.But “SETUP TOUR RESTART?” will not be displayed. Select SETUP TOUR in the INSTALL menu.

MENU	INSTALL menu	VIDEO-2 SETTING	MENU	INSTALL menu	SETUP TOUR
VIDEO	If a normal video signal (composite video signal) is input.
COMPONENT	If a component video signal (Y/CB/CR) is input.

You must choose a setting follow as signal that you input to VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must choose VIDEO-2 SETTING to VIDEO.)

For connecting methods, see “Additional Preparation” on page 18.

DISPLAY

You can display the program number and video terminal number on the screen.

Press the DISPLAY button to display the indication on the screen.

LANGUAGE

You can choose your desired on screen display language. Select the LANGUAGE in the INSTALL menu, then choose a language.

MENU INSTALL menu LANGUAGE

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

16