
3.5.Power Management Setup
øThis is used to control the various power saving features of the PC.
CMOS Setup
Power Management Setup
|
|
|
|
|
|
|
| ACPI Suspend Type |
| [S1(POS)] |
| Item Help | |
| [Off] |
| Menu Level} | |||
| System After AC Back |
| [Off] |
|
|
|
| IRQ |
| [Enabled] |
| [S1] |
|
| ModemRingOn |
| [Enabled] |
| Set suspend type to | |
| PME Event Wake Up |
| [Enabled] |
| Power On Suspend under | |
| Power On by Keyboard | [Disabled] |
| ACPI OS | ||
| Power On by Mouse |
| [Disabled] |
|
|
|
| Resume by Alarm |
| [Disabled] |
| [S3] |
|
x | Month Alarm |
| NA |
| Set suspend type to | |
x | Day (of Month) |
| Everyday |
| Suspend to RAM under | |
x | Time (hh:mm:ss) |
| 0 0 0 |
| ACPI OS | |
| Power LED in S1 state |
| [Blinking] |
|
|
|
|
|
|
|
|
|
|
| higf: Move | Enter: Select | ESC: Exit | F1: General Help | ||
|
| F5: Previous Values | F6: | F7: Optimized Defaults | ||
|
|
|
|
|
|
|
nACPI Suspend Type
Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)
nSoft-off by PWR_BTTN
Controls whether the PC shuts off immediately after hitting the power button or delaying a few seconds. (default:Off)
Options: Off (PC shuts off immediately)
Suspend (Press power button 4 sec to power off. Enter suspend if button is pressed less than 4 sec)
nSystem After AC BACK
Allows user to select system status when power is removed and returned.
Options: Off (Always in off state when AC back)
On (Always power on system when AC back)
Laststate (System power on depends on the status before AC lost) (default:Off)
nIRQ [3-7, 9-15], NMI
When IRQ
nModemRingOn
To use this feature, an Ethernet card supporting the PCI2.2 or newer standard must be used. (default:Enabled)
nPME Event Wake Up
Allows user to select the Power Management Event (PME) wake up function which requires the system to have a +5VSB power supply using a rate of 1A or less. (default:Enabled)
English
17