
English
3.8.Frequency/Voltage Control
øThis allows user to configure CPU frequency and voltage settings.
CMOS Setup
Frequency/Voltage Control
|
|
|
|
|
|
Linear Frequency Control | [Disabled] |
| Item Help | ||
ø CPU Clock(MHz) |
| 100 |
| Menu Level} | |
ø DRAM Clock(MHz) |
| AUTO |
|
|
|
AGP Voltage Control | [Normal] |
|
|
| |
DRAM Voltage Control | [Normal] |
|
|
| |
CPU Voltage Control | [Normal] |
|
|
| |
|
|
|
|
|
|
higf: Move | Enter: Select | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: | F7: Optimized Defaults | ||
|
|
|
|
|
|
øThis section is very dangerous for inexperienced users, and therefore it is not recommended that these settings be altered. An incorrect setting can result in system instability, corrupt data, or permanent hardware damage.
nLinear Frequency Control
Allows user to use Linear Frequency Control (default:Disabled)
nCPU Clock (MHz)
If you wish to use this feature, please set the "Linear Frequency Control" to Enabled. If this feature is disabled, the currently CPU frequency will be displayed.
The CPU Clock can be input between 100MHz to 355MHz.
nDRAM Clock (MHz)
Allows user to adjust the DRAM clock frequency. (default:Auto)
Please note that if the DRAM clock frequency is incorrectly set, the system will be unable to start. You can use the clear CMOS method to return the system to its default settings.
nAGP Voltage Control
Allows user to set the AGP voltage. (default:Normal)
Please note that by overclocking your system through the increase of the AGP voltage, system instability or damage to the AGP card may occur.
Options: Normal (automatic setting of AGP voltage at 1.5V) +0.1V (AGP voltage range)
nDRAM Voltage Control
Allows user to set the DIMM voltage. (default:Normal)
Please note that by overclocking your system through the increase of the DIMM voltage, damage to the memory may occur.
Options: Normal (automatic setting of DIMM voltage at 2.5V) +0.1V (DIMM voltage range)
20