This water heater shall not be connected to any heating systems or component(s) used with a non-potable water heating appliance.

Toxic chemicals, such as those used for boiler treatment shall not be introduced into this system.

Water supply systems may, because of such events as high line pressure, frequent cut-offs, the effects of water hammer among others, have installed devices such as pressure reducing valves, check valves, back flow preventers, etc. to control these types of problems. When these devices are not equipped with an internal by-pass, and no other measures are taken, the devices cause the water system to be closed. As water is heated, it expands (thermal expansion) and closed systems do not allow for the expansion of heated water.

The water within the water heater tank expands as it is heated and increases the pressure of the water system. If the relieving point of the water heater’s temperature-pressure relief valve is reached, the valve will relieve the excess pressure. The temperature-pressure relief valve is not intended for the constant relief of thermal expansion. This is an unacceptable condition and must be corrected.

It is recommended that any devices installed which could create a closed system have a by-pass and/or the system have an expansion tank or device to relieve the pressure built by thermal expansion in the water system. Expansion tanks are available for ordering through a local plumbing contractor. Contact the local water supplier and/or a service agency for assistance in controlling these situations.

NOTE: To protect against untimely corrosion of hot and cold water fittings, it is strongly recommended that di- electric unions or couplings be installed on this water heater when connected to copper pipe.

Figure 4 shows the typical attachment of the water piping to the water heater. The water heater is equipped with 1/2 inch NPT water connections.

NOTE: If using copper tubing, solder tubing to an adapter before attaching the adapter to the cold water inlet connection. Do not solder the cold water supply line directly to the cold water inlet, it will harm the dip tube and damage the tank.

FIGURE 4.

WATER PIPING PRESSURE TEST

This section is only for the manufacturer installing the water heater when the installation is to comply with H.U.D. Standards.

When testing the water ways, H.U.D. Standards state: “Water distribution system: All water piping in the water distribution system shall be subjected to a pressure test. The test shall be made by subjecting the system to air or water at 100 psi for 15 minutes without loss of pressure.

When air pressure is used, the water heater shall not be connected during the test.”

Temperature- Pressure Relief Valve

Page 7 Page 9
Page 8
Image 8
A.O. Smith AOSRE50400 warranty Water Piping Pressure Test, Temperature- Pressure Relief Valve
Page 7 Page 9

AOSRE50400 specifications

A.O. Smith AOSRE50400 is a high-efficiency water heater that exemplifies advanced technology and engineering, making it a popular choice for residential and commercial applications. This model is part of A.O. Smith’s comprehensive line of water heating solutions and is designed to provide reliable performance while maximizing energy efficiency.

One of the standout features of the AOSRE50400 is its high energy factor (EF), which greatly contributes to reduced energy bills and a smaller environmental footprint. With an EF rating of approximately 0.95, this water heater utilizes innovative design techniques to ensure that more of the energy consumed is converted into usable hot water. It meets and often exceeds the stringent energy efficiency standards set by the Department of Energy.

The AOSRE50400 is equipped with advanced insulating materials, which minimize heat loss and improve overall efficiency. This is particularly beneficial in maintaining water temperature for extended periods, reducing the need for excessive reheating. The tank has been designed with a glass-lined interior that offers enhanced durability and resistance to corrosion, extending the lifespan of the unit.

Another important characteristic of the AOSRE50400 is its large capacity. With a tank size of 50 gallons, it can effectively meet the hot water demands of medium to large households or businesses. This capacity allows for simultaneous usage across multiple outlets, ensuring that you never run out of hot water when you need it most.

The digital display and user-friendly interface provide homeowners with easy control over temperature settings and operation modes. This feature enhances user convenience and allows for customized hot water delivery that can cater to specific usage needs. Furthermore, the built-in diagnostic system alerts users to any potential issues, ensuring timely maintenance and reducing the risk of costly repairs.

A.O. Smith also prioritizes safety in the design of the AOSRE50400. It comes with multiple safety features, including a temperature and pressure relief valve, which helps prevent potential overpressure situations. This commitment to safety ensures peace of mind for users and compliance with local plumbing codes.

In summary, the A.O. Smith AOSRE50400 water heater exemplifies modern engineering and technology, offering high energy efficiency, a durable design, user-friendly controls, and a strong commitment to safety. Its large capacity and advanced features make it an exceptional choice for those seeking reliable and efficient hot water solutions.
Top Page Image Contents