A.O. Smith BTR-151 through BTR-201 warranty Booster Models, ACGSS00705, Warranty

Commercial Gas Water Heaters

BOOSTER MODELS

The Master-Fit® BTR-151 and BTR-201 are designed for installation in “booster” applications, to supply commercial dishwashers with very high temperature water… usually 180ºF. A booster water heater is normally used in conjunction with a standard water heater water delivering hot water at a lower temperature to meet the non-dishwashing needs of a restaurant or other foodservice application.

With a 32-gallon storage tank, these compact units measure only 45'' high, and hot and cold water connections can be made in the top, front or rear, for installation versatility.

THE ELIMINATOR™ SELF-CLEANING SYSTEM

•Designed to significantly reduce or eliminate buildup of lime, sand and other sediment inside the tank

•Reduced sediment buildup helps Master-Fit water heaters maintain their rated energy-efficiency and reduce water heating costs

•Self-cleaning system also helps prolong tank life

BUILT-IN INDUCED DRAFT BLOWER

•Produces power-induced draft of makeup air prior to burner ignition

•Provides more efficient control of heat through the flue collector

•No draft hood or barometric damper required

RATED AS CATEGORY 1 APPLIANCE

•Can be commonly vented with other Category 1 appliances, using standard metal type “B” vent

PERMAGLAS® ULTRA COAT GLASS LINING

•Exclusive process provides superior protection against corrosion

•CoreGard anode rods with stainless steel core provide additional corrosion protection

THREE WATER CONNECTION OPTIONS

•Hot and cold water connections can be made through top, front or rear of water heater

•The Eliminator self-cleaning device operates when cold water is connected through front

INTERMITTENT ELECTRONIC IGNITION

•Eliminates standing pilot

•Includes power ON/OFF switch

•Provides flame failure response in less than one second

FACTORY-INSTALLED TEMPERATURE & PRESSURE RELIEF VALVE MAXIMUM HYDROSTATIC WORKING PRESSURE 160 PSI

80% THERMAL EFFICIENCY

CODES AND STANDARDS

•Design-certified by UL (Underwriters Laboratories), according to ANSZ21.10.3-CSA4.3 standards governing storage-type water heaters

•Meets ASHRAE/IESNA 90.1-1999

•Optional ASME construction available

WARRANTY

•Three-year limited warranty against tank leaks

•For complete warranty information, consult written warranty shipped with water heater, or contact A.O. Smith Water Products Company

June2007R

BTR-151 through BTR-201

ACGSS00705