MEDIUM TEMPERATURE - ONE HEATER WITH AUXILIARY STORAGE TANK FORCED
CIRCULATION WITH OR WITHOUT BUILDING RECIRCULATION
VERTICAL STORAGE TANK
* PIPE RELIEF VALVE TO OPEN DRAIN. |
|
**WHEN USING AN A.O. SMITH |
|
| |
LOWER 3/4” OPENING FOR TANK |
|
TEMPERATURE CONTROL. |
|
IF BUILDING CIRCULATING LOOP IS USED, |
|
CONNECT TO AN OPENING NEAR THE |
|
BOTTOM OF THE TANK. | HORIZONTAL STORAGE TANK |
|
CAUTION: IF BUILDING COLD WATER SUPPLY HAS A
BACKFLOW PREVENTER, CHECK VALVE OR WATER
METER WITH CHECK VALVE. PROVISIONS FOR
THERMAL EXPANSION OF WATER IN THE HOT WATER
SYSTEM MUST BE PROVIDED.
*PIPE RELIEF VALVE TO OPEN DRAIN
INSTALL IN ACCORDANCE WITH LOCAL CODES.
DANGER
TEMPERATURE SETTING SHOULD NOT EXCEED
SAFE USE TEMPERATURE AT FIXTURES. SEE
WATER TEMPERATURE CONTROL WARNING ON
PAGE 20. IF HIGHER PREHEAT TEMPERATURES
ARE NECESSARY TO OBTAIN ADEQUATE
BOOSTER OUTPUT, ADD AN
FOR HOT WATER SUPPLIED TO FIXTURES.
17
