BEST WAY TO USE A VOLT-AMMETER

For Voltage Check

1.Attach leads to the volt-ammeter and select the proper voltage scale.

2.Test voltage at the motor line terminals and verify that it’s within limits while the motor is operating.

3.Voltage should be within ±10% of the design voltage specified on the motor nameplate.

For Amperage Check

1.Remove the leads from the volt-ammeter if attached. Select lowest reading amperage scale according to motor nameplate rating.

2.Clamp instrument around one incoming lead at the motor terminal board.

3.Observe the amperage as motor runs. With proper voltage, the reading should not exceed the MAXIMUM LOAD or SF amps rating of the motor.

HOW TO REPLACE BEARINGS

Replacing the bearings in a motor isn’t a difficult task, provided you follow set procedures. These instructions explain the correct method of motor bearing removal and replacement. If a bearing is noisy or doesn’t run smoothly, it should be replaced. If a bearing has been removed for any reason, it should be replaced with a new one. As a rule, if it’s necessary to replace one bearing, replace the other as well.

Use only A.O. Smith bearings with the proper part number for the motor that you’re working on. A.O. Smith bearings are lubricated and require no further attention during their life. Do not substitute or reuse old

24

Page 24 Page 26
Page 25
Image 25
A.O. Smith Pool & Spa Motor manual For Voltage Check, For Amperage Check
Page 24 Page 26

Pool & Spa Motor specifications

A.O. Smith has established a solid reputation in the pool and spa industry with its high-performing motors designed to enhance the efficiency and longevity of water systems. The A.O. Smith Pool & Spa Motor stands out as an exemplary choice for pool professionals and homeowners alike, combining advanced technologies with practical features to meet the demands of modern aquatic environments.

One of the primary highlights of the A.O. Smith Pool & Spa Motor is its robust construction. Built with high-quality materials, this motor is designed to withstand the rigors of outdoor conditions, ensuring long service life and reliability. The design incorporates a weather-resistant enclosure that helps protect the motor from moisture, dust, and debris, which are common factors that can lead to motor failure over time.

Energy efficiency is another significant feature of A.O. Smith motors. Designed with advanced engineering, these motors maximize performance while minimizing energy consumption. This not only contributes to lower utility bills but also supports environmentally friendly practices, making it an ideal choice for eco-conscious consumers.

The A.O. Smith Pool & Spa Motor also features a thermally protected design, which prevents overheating during prolonged use. This safeguard enhances the safety of the motor and reduces the risk of potential damage, extending its operational lifespan. Additionally, the motor is equipped with an efficient ventilation system that promotes proper airflow, further preventing overheating issues.

Another notable technology employed in the A.O. Smith motors is the use of a quiet operation design. This feature is particularly beneficial for residential pool and spa settings where noise can be a significant concern. The motor operates quietly, allowing users to enjoy their poolside experience without the disruptive sounds of traditional motors.

Ease of installation is also a hallmark of the A.O. Smith Pool & Spa Motor. Designed to fit various applications, the motors are compatible with most existing systems, simplifying the replacement process. Comprehensive user manuals and support ensure that both professionals and DIY enthusiasts can install the motors without significant hassle.

In summary, the A.O. Smith Pool & Spa Motor combines durability, energy efficiency, and quiet operation in a package that meets the needs of swimming pool and spa owners. Its innovative features and technologies position it as a reliable choice for enhancing the performance and longevity of aquatic systems, ensuring optimal enjoyment and peace of mind for users.
Top Page Image Contents