6.Remove the bearing(s) from the motor shaft, following these steps as necessary:

a)Remove shaft collars used to secure bearings. Don’t reuse a bearing that is removed from the shaft.

7.Install the new shaft bearing(s). It is important to press only on the bearing inner race. The bearing will be damaged if the outer race surface is pressed.

a)Fan end. Place the short end of the shaft on a wood block. Place the bearing (and other parts used) over the long end of the shaft. Tap the bearing into place, using the proper size tube and a mallet. Attach any other parts (as used) to the long shaft end.

b)Opposite end. Place the long end of the shaft on the wood block. Place the bearing over the short end of the shaft. Tap the bearing into place, using the proper size tube and a mallet.

8.Reassemble the motor in reverse of the disassembly procedure.

a)Observe all reassembly precautions.

b)Check wiring diagrams to assure proper wiring if the leads have been removed from the terminals.

c)TURN ON THE POWER. Check the motor for proper electrical and mechanical operation when it has been reinstalled.

26

Page 26 Page 28
Page 27
Image 27
A.O. Smith Pool & Spa Motor manual
Page 26 Page 28

Pool & Spa Motor specifications

A.O. Smith has established a solid reputation in the pool and spa industry with its high-performing motors designed to enhance the efficiency and longevity of water systems. The A.O. Smith Pool & Spa Motor stands out as an exemplary choice for pool professionals and homeowners alike, combining advanced technologies with practical features to meet the demands of modern aquatic environments.

One of the primary highlights of the A.O. Smith Pool & Spa Motor is its robust construction. Built with high-quality materials, this motor is designed to withstand the rigors of outdoor conditions, ensuring long service life and reliability. The design incorporates a weather-resistant enclosure that helps protect the motor from moisture, dust, and debris, which are common factors that can lead to motor failure over time.

Energy efficiency is another significant feature of A.O. Smith motors. Designed with advanced engineering, these motors maximize performance while minimizing energy consumption. This not only contributes to lower utility bills but also supports environmentally friendly practices, making it an ideal choice for eco-conscious consumers.

The A.O. Smith Pool & Spa Motor also features a thermally protected design, which prevents overheating during prolonged use. This safeguard enhances the safety of the motor and reduces the risk of potential damage, extending its operational lifespan. Additionally, the motor is equipped with an efficient ventilation system that promotes proper airflow, further preventing overheating issues.

Another notable technology employed in the A.O. Smith motors is the use of a quiet operation design. This feature is particularly beneficial for residential pool and spa settings where noise can be a significant concern. The motor operates quietly, allowing users to enjoy their poolside experience without the disruptive sounds of traditional motors.

Ease of installation is also a hallmark of the A.O. Smith Pool & Spa Motor. Designed to fit various applications, the motors are compatible with most existing systems, simplifying the replacement process. Comprehensive user manuals and support ensure that both professionals and DIY enthusiasts can install the motors without significant hassle.

In summary, the A.O. Smith Pool & Spa Motor combines durability, energy efficiency, and quiet operation in a package that meets the needs of swimming pool and spa owners. Its innovative features and technologies position it as a reliable choice for enhancing the performance and longevity of aquatic systems, ensuring optimal enjoyment and peace of mind for users.
Top Page Image Contents